In the market, you may get confused to buy windows and door from a wide range of options. But, before you take them home, here is guide you need to skim through when doors and windows have to be fitted for a coastal home.
Whenever you are purchasing a window, you should check for warranty. If the window is made from glass, then the warranty should cover up the costs for 10 years. In case the window is quite big with respect to its dimensions, then no warranty can imply that the quality has been compromised. Almost 30 percent of experts would replace windows with the ones which are seven years old. It’s at that point of time people have doubts regarding quality. Besides, the windows should meet the standards and structural measures if it’s for a house along the coast. The language is what you need to look for even if you come across the words, ‘lifetime warranty’.
“Non-Prorated” warranties mean that the entire market price is taken care of. There’s nothing mentioned about prorated warranty because a well designed window takes time when expose to different climatic conditions.
“Non-Glass” parts should ideally be covered under a 10 year warranty. This is because it the lock breaks all of a sudden ten it might give a bad impression to the one who installed the window. It’s at that instance, the manufacturer should be ready to offer replacement parts in future.
Labor and Installation Unless a certified expert installs the unit, few warranties actually cover up the costs pertaining to installations. Some may show a willingness, but ultimately it’s better to go for reputed and trustworthy brands.
“Fully Transferable” warranties are most likely to enhance the resale value of the house. It can be referred to as a value-added feature that the remodeler can boast while he is putting forth his suggestions on the window homeowners need to buy.
Exclusions – This is something you must look for when you are along the coast. While some warranties take care of the damages due to high humidity or salt spray, others may not compensate for glass and hardware.
Once you go through the papers, you would be assured about dealing with a manufacturer who is striving to protect its reputation. Additionally, don’t forget to check for the NFRC label which signifies the energy performance. On the other hand, an AAMA label can enhance the confidence that the window or door is not prone to air leakages or penetration of water from gaps.
Basic Energy Specifications
Once you prefer installing a window, you can compare the performance values based on the configuration through a selection tool. But before taking any step further, you should be aware about the measurements related with the performance. Here’s what you need to know apart from the NFRC label.
This is nothing but a parameter which determines the heat flow. Ideally, if the factor is low, the less amount of heat would pass through the windows. It’s is recommended to go for a U-factor measuring 0.35 or less. When it’s hot outdoors, then your concern should be around a factor up to 0.65. Do note that radiant solar heat gain is much more important than conductive heat flow.
Solar Heat Gain Coefficient (SHGC)
Such a type of coefficient should be 0.35 so that the indoor temperature is at an optimum level. The number ‘0.35’ means that 35% heat is actually responsible to heat the rooms while the rest is reflected back by glass. In cities which are cold almost the entire year, a higher SHGC can be taken into consideration. But, above all, a value of not less than 0.50 can help the homeowner capture sufficient solar heat gain. Anywhere when the air conditioner is switched on during summer, a low SHGC is always safe.
Visible-Light Transmittance (VT)
This factor gives you an idea of the sunlight passing through the windows. Depending on the weight of the frame, a lower VT can surely be the safest bet. For residential windows, the VT rating should be higher than the SHGC. This means the rooms must be illuminated well by natural light regardless of the outdoor weather. But, if that’s not for the purpose you want, then the VT value can be overlooked.
Finally, it’s better to inspect the material rather than lamenting in future. Select laminated glass because they don’t tend to break even if the region experiences a tropical cyclone. Moreover, a laminated window pane can never be broken easily when a burglar tries to enter a house. A brittle material can reduce sound vibrations when a flexible inter layer is added to enhance the effects. Think about UV protection because once the ultra-violet lights are blocked the quality of carpets won’t fade away. The vinyl flooring would also appear fresh and never get discolored with a tinge of yellow.
As far as water penetration is concerned, the value should be minimum. Worse to worse, a window matching the AAMA 101 specifications would certainly leak when 35 mph wind is blowing near the sea- shore. What’s more – the window is sure to get damaged once the hurricane hits the area.